To delete the received location information
∫
1
Select [Location Logging] on the [Playback] menu.
2
Press 3/4 to select [Delete Location Data] and then press [MENU/SET].
3
Press 3/4 to select the period you want to delete, then press [MENU/SET].
•
Confirmation screen is displayed.
It is executed when [Yes] is selected.
•
This function is not available in the following cases:
–
Images recorded after location information was sent to the camera
–
Motion pictures
–
Images with location information already written to them
–
Images protected by [Protect]
–
When there is insufficient space left on the card
–
When the Write-Protect switch to the card is set to the [LOCK] position
–
Images recorded with other devices
[Title Edit]
You can add text (comments) to pictures. After text has been registered, it can be stamped in
prints using [Text Stamp] (P116).
1
Select [Title Edit] on the [Playback] menu.
2
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
3
Select the picture, and then press [MENU/SET]
to set.
•
['] is displayed for pictures with titles already registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then press [MENU/
SET] to set.
•
The setting is cancelled when [DISP.] is pressed again.
4
Enter the text.
•
Exit the menu after it is set.
•
To delete the title, erase all the text in the text input screen.
•
You can set up to 50 pictures at one time in [MULTI].
•
This function is not available in the following case:
–
Motion pictures
Playback/Editing
(P90)
- 115 -
(P135)
1
2
4
5
3
6