Table of Contents
Advertisement
Note
•
Make sure that all the handsets registered to the base
station are D310/D315 in order to have the ECO+
feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to “listen” more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
Name the handset
The name of the handset can be up to 12
characters. It is displayed on the handset screen
in standby mode.
1
Press MENU/OK.
2
Select [Phone setup] > [Phone name],
then press MENU/OK to confirm.
3
Enter or edit the name. To erase a
character, press REDIAL/C.
4
Press MENU/OK to confirm.
» The setting is saved.
Set the date and time
For information, see 'Set the date and time' in
the 'Get started' section.
Set the display language
Note
•
This feature only applies to models with multiple-
language support.
•
Languages available vary from country to country.
1
Press MENU/OK.
2
Select [Phone setup] > [Language], then
press MENU/OK to confirm.
3
Select a language, then press MENU/OK
to confirm.
» The setting is saved.
EN
Page 23
Advertisement
Table of Contents
