Description Of Controls; Monitor Unit - Marmitek WJ1512 User Manual

A. MONITOR
PUSH
QUADAUTO CA1 CA2 CA3 CA4 TALK
7 9
VCR
ON OFF
6 1 2 3
Front View
1512/1512Q
DESCRIPTION OF CONTROLS & OPERATION
14
POWER
10 11 12 13
8
5
4
FRONT VIEW
1. TIME CONTROL KNOB
To vary the display switching speed from 3 to 60 seconds. When the system is
in the auto mode with more than one camera, this knob enables you to vary
the time of stay from one location to another from 3 to 60 seconds. Turning this
knob in clockwise direction will increase the time of stay up to 60 seconds.
Turning this knob all the way in counter clockwise direction will quickly show
the locations.
2. BRIGHTNESS CONTROL KNOB
To adjust the BRIGHTNESS of the screen.
3. CONTRAST CONTROL KNOB
To adjust the CONTRAST of the screen.
4. VERTICAL HOLD CONTROL KNOB
To adjust the VERTICAL synchronization.
5. VOLUME CONTROL KNOB
Turn on the volume control up or down to reach volume desired.
6. VCR ON/OFF SELECTOR
Press it to review the video signal from VCR. Press it again to stop the video
signal. VCR Recording Reviewing Method
1) Connect the monitor to the VCR and press the RECORD button on the
VCR to start recording the pictures.
2) To review the recorded pictures, press the VCR button on the monitor and
then the PLAY button on the VCR.
7. MICROPHONE
Pick up sound around the monitor.
7