How do I get started?
If the Dimmer has already been installed, refer to
the quick setup guide on the following pages to
get going. If you are planning to install the
Dimmer, please refer to the installation instruc-
tions that follow quick setup. This will guide you
through the installation process.
What do I need?
To install the Dimmer, you will need to remove
and replace the existing lightswitch. This is
usually straightforward, but you must ensure that
there is a suitably deep housing (backbox) and
understand how to safely turn o
supply. You will also need suitable electrical
screwdrivers.
Help Video
You
can
scan
smartphone. It will take you to a video that will
help guide you through setup and installation.
this
QR
code
Get Started
the electricity
with
your