The Oven Should Switch On And Off Automatically; Rapid Heating; Setting The Clock - Siemens HB331.0T Instruction Manual

The oven should switch on and off
automatically
Do not allow food to stand for too long in the oven. Meat and
fish spoils easily if not kept chilled.
Example in the picture: Top/bottom heating
10:45 . The meal takes 45 minutes to cook and should be
ready at 12:45 .
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
Press the clock button.
0
3.
The Cooking time symbol flashes.
x
Use the + or - button to set the cooking time.
4.
Press the 0 Clock button repeatedly until the
5.
symbol flashes.
You can see in the display when the meal will be ready.

Setting the clock

When the appliance is connected for the first time or after a
power cut, the 0 symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.
Setting procedure
Press the Clock button.
0
1.
12.00 appears in the display and the
Use the + or - button to change the clock.
2.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
Press the Clock button twice and change the time using the
0
+ or - button.
8
% , 200 °C. It is
y End time
K
PLQ
NJ
symbol flashes.
0
symbol goes
0
Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
Set the function selector to
1.
Use the temperature selector to set the temperature.
2.
The oven will start heating after a few seconds. The indicator
light above the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
K
PLQ
NJ
button
0
.
I