Installing The Belt Clip On The I755 - NEC DECT G355 User Manual

Installing the belt clip on the I755

You can use the belt clip to fasten the handset on a belt, shirt or coat
pocket. The I755 is fitted with a belt clip when initially delivered to the
customer.
When the I755 is used with a vertical pouch the belt clip is to be
replaced by the belt clip cover; when used with the horizontal pouch it‟s
not necessary to do this (but it is allowed).
To remove the belt clip:
1. Place the handset facedown on a flat surface.
2. Use a screwdriver (type Pozidriv 0 or PZ0) to unscrew the two
screws by which the belt clip is attached to the handset.
3. Put the belt clip cover in place.
4. Replace the screws and fasten the belt clip cover to the
handset.
To replace the belt clip:
1. Place the handset facedown on a flat surface.
2. Use a screwdriver (type Pozidriv 0 or PZ0) to unscrew the two
screws by which the belt clip cover is attached to the handset.
3. Put the belt clip in place.
4. Replace the screws and fasten the belt clip to the handset.
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
Telephone settings
201