Linear AKR-1 Installation And Programming Instructions page 16

Beeper Sound Level
The keypad's beeper can be set to low or high level.
❑ If the keypad's beeper is too loud for the keypad's location,
remove jumper JP1 (see Figure 9).
Figure 9. Removing the Beeper Jumper
14
REMOVE JUMPER JP1 TO
REDUCE THE BEEPER
VOLUME
Locking Keypad
After the installation is complete. Lock the keypad using the keylock
(see Figure 10).
HOOK KEYPAD
ONTO BACKPLATE
USE KEY TO
LOCK KEYPAD
Figure 10. Locking the Keypad Case