Panasonic SC-PT22 Operating Instructions Manual page 5

Remote control
1 Turn the main unit on/off (
2 Select the play mode ( 11)
3 Select channels and title numbers etc. / Enter numbers
( 9, 11)
4 Set the repeat mode ( 11)
5 Basic operations for play (
6 Select preset radio stations (
7 Select surround sound effects (
8 Show a disc top menu or program list (
9 Select or confirm menu items / Frame-by-frame (
: Show a disc menu or play list (
; Show setup menu or select speaker channel (
< Turn Whisper-mode Surround on/off (
= TV operations
Aim the remote control at the Panasonic TV and press the button.
[Í]: Turn the TV on/off
[AV]: Change the TV's video input mode
[r, VOL, s]: Adjust the TV volume
This may not work properly with some models.
> Adjust the volume of the main unit
? Mute the sound
≥ "MUTE" flashes on the main unit's display while the function is on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled when you switch the unit to standby.
@ Source select
[DVD]: Select disc as the source (
[RADIO]: Select FM tuner (
[EXT-IN]: Select external audio as the source (
USB ,# AUX/TV
A Select radio stations manually (
B Select sound mode ( 10)
C Show START menu ( 9)
D Show on-screen menu ( 12)
E Return to previous screen (
Language code list
8)
11)
9)
10)
11, 12)
11)
11, 12)
8, 10)
10)
8)
9)
9)
9)
11)
F Cancel ( 11)
G Switch information on the main unit's display (
or
Set the Sleep timer
Press and hold [sSLEEP].
While the time is shown on the main unit's display, press
[sSLEEP] repeatedly.
SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120
^------------------------ OFF (Cancel) (------------------------}
≥ To confirm the remaining time, press and hold the button again.
Avoiding interference with other Panasonic equipment
Other Panasonic audio/video equipment may start functioning when you
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control
operating mode to "REMOTE 2".
The main unit and remote control must be set to the same mode.
1 Press [EXT-IN] to select "AUX/TV".
2 Press and hold [1] on the main unit and [2] on the remote control until
the main unit's display shows "REMOTE 2".
3 Press and hold [OK] and [2] on the remote control for at least 2
seconds.
To change the mode back to "REMOTE 1", repeat the steps above by
replacing [2] with [1].
Main unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2 Open/Close the disc tray (
3 Remote control signal sensor
4 Display
5 Connect USB device ( 14)
6 Adjust the volume of the main unit
7 Stop playing
8 Play disc
11)
11)
5