Seats - SMART 453 Series Introduction Into Service Manual

Seats

The seats in both the front and the rear have a striking sporty
design and are similar in appearance to integral sport seats
with integrated head restraints. The left and right seats in the
rear have the characteristics of individual seats. The high va-
riability of the seats provides a versatile vehicle interior.
The new seats fulfill a wide range of different requirements in
the areas of seating comfort, ergonomics, passive safety and
sportiness.
The characteristic features of the seats include the use of
high-strength steels, the half-cushion shell with comfort
supporting springs and high backrests with pronounced side
supports. The padding of the seat cushions and backrests
consists of PUR foam.
Front seats
Introduction of the New smart fortwo coupé and smart forfour | Model Series 453
– This printout will not be recorded by the update service. Status: 06/2014 –
In order to simultaneously fulfill the requirements for comfort
and lateral support, the foam cushion padding incorporates
different hardness zones, while the side areas make use of
harder foam.
Due to the higher backrest pivot point, it is possible to fold
the backrests down fully onto the seat cushion. Depending
on the equipment installed, this is facilitated by a latch fitting
on the front passenger seat. Latch fittings are available on
the driver and front passenger seat on the coupé. The front
passenger seat of the coupé is equipped with ISOFIX mounts
with insertion guides for convenient attachment of a child
seat.
Seats
P91.00-2331-00
37