Service Mode Adjustments - Sanyo CP14G1 Service Manual

Colour tv
Hide thumbs Also See for CP14G1:
Table of Contents

Advertisement

Service Mode Adjustments

Following adjustments should be carried out when the memory IC is replaced. How to enter the service mode and
adjust values, please refer to " Entering to Service mode" on page 11.
Item 01 [RF AGC] AGC
NOTE: Do not attempt this adjustment with weak signal.
(1) Tune the receiver to most clearest (or strongest) VHF
station in your area. Set the brightness and contrast
controls to maximum. Set the colour control to
minimum.
(2) Select [RF AGC] in the service mode.
(3) Change value until the snow noise just disappears.
(4) Exit from service mode.
Item 02 [H-PHA] HORIZONTAL CENTRE
(1) Receive a monochrome circular pattern.
(2) Set the brightness and contrast to normal.
(3) Select [H-PHA] in the service mode.
(4) Change value to be optimum horizontal centre position.
(5) Exit from service mode.
Item 04 [V-SIZ] VERTICAL SIZE
(1) Receive a monochrome circular pattern.
(2) Set the brightness and contrast to maximum.
(3) Select [V-SIZ] in the service mode.
(4) Change value to be optimum vertical size.
(5) Exit from service mode.
Horizontal centre
Vertical size
Item 05 [V-SCO] V-S CORRECTION
(1) Receive a crosshatch pattern.
(2) Select a picture mode of NATURAL by pressing the
PICTURE MODE button.
(3) Select [V-SCO] in the service mode.
(4) Adjust Vertical S-letter Correction so that the difference
of "c", "d" and "e" becomes less than 2 mm by pressing
the VOLUME + or - button.
(5) Confirm Vertical Linearity and adjust Vertical Size.
(6) Exit from service mode.
c
d
e
Item 06 [V-LIN] VERTICAL LINEARITY
(1) Receive a crosshatch pattern.
(2) Select a picture mode of NATURAL by pressing the
PICTURE MODE button.
(3) Select [V-LIN] in the service mode.
(4) Adjust Vertical Linearity so that the difference of "a" and
"b" becomes less than 3mm by pressing VOLUME + or
- button.
(5) Exit from service mode.
a
b
-12-
Upper
Center
Bottom
Upper
Center
Bottom

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp14g1a

Table of Contents