Cabinet Disassembly Instructions - Emerson LC320EM9 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[16] Function CBA [12] Stand Holder
[17] Speaker
[4] Rear Cabinet
Holder (L,R)
[18] Speaker(s) [5] Shield (T)
[14] Junction-A
[6] Shield Box
CBA
[7] Digital Main
[15] IR Sensor
CBA Unit
CBA
[8] Power Supply
CBA
[9] Inverter CBA
[11] PCB Holder
(L,R)
[13] LCD Module
Assembly
[19] Front Cabinet
2. Disassembly Method
Step/
Loc. Part
Fig.
No.
No.
Stand Base
[1] D1 4(S-1), 3(S-2), 4(S-3)
Plate
Stand
[2] D1 ---------------
Cover
Stand
[3] D1 ---------------
Hinge
Rear
[4] D1 12(S-4), 2(S-5), 2(S-6)
Cabinet
[5] Shield (T) D2 (S-7), (S-8), (N-1)
2(S-9), 3(S-10),
[6] Shield Box D2
4(S-11)
*CN3601, *CN3701,
Digital Main D2
[7] *CN3704, *CN4501,
CBA Unit D5
*CN4502
Power 7(S-12), *CN102,
D2
[8] Supply *CN501, *CN801,
D5
CBA *CN802, *CN1901
[1] Stand Base
Plate
[2] Stand Cover
[3] Stand Hinge
[10] Junction-B
CBA
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
---
---
---
---
---
---
---
---
Step/
Loc. Part
Fig.
No.
No.
Inverter D3
[9]
CBA D5
Junction-B D3
[10]
CBA D5
PCB Holder
[11] D3 4(S-14)
(L,R)
Stand
[12] D3 2(S-15), 2(S-16)
Holder
LCD
[13] Module D4 4(S-17)
Assembly
Junction-A D4
[14]
CBA D5
IR Sensor D4
[15]
CBA D5
Function D4
[16]
CBA D5
Speaker
[17] Holder D4 4(S-20)
(L,R)
[18] Speaker(s) D4 ---------------
Front
[19] D4 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
N = Nut, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
4-1
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
7(S-13), *CN1050,
*CN1100, *CN1150,
*CN1200, *CN1250
Desolder
Desolder
2(S-18), *CL102A
2(S-19)
↓
(4) (5)
A8AF1DC
---
---
---
---
---
---
---
---
---
---
---
↓