The Axis Media Control; Other Methods Of Accessing The Video Stream - Axis 210 User Manual

Hide thumbs Also See for 210:
Table of Contents

Advertisement

Unicasting should be used for video-on-demand broadcasting, so that there is no video
traffic on the network until a client connects and requests the stream. However, as more
and more unicast clients connect, the traffic on the network will increase and may cause
congestion. Although there is a maximum of 20 unicast viewers, note that all multicast
users combined count as 1 unicast viewer.
RTP/RTSP
This unicast method is RTP tunneled over RTSP. This can be used to exploit the fact that it
is relatively simple to configure firewalls to allow RTSP traffic.
RTP/RTSP/HTTP or RTP/RTSP/HTTPS
These two methods can also be used to traverse firewalls. Firewalls are commonly
configured to allow the HTTP protocol, thus allowing RTP to be tunneled.

The AXIS Media Control

The recommended method of accessing live video (MPEG-4 and/or Motion JPEG) from the
AXIS 210/210A/211/211A is to use the AXIS Media Control (AMC) in Microsoft Internet
Explorer for Windows. This ActiveX component is automatically installed on first use, after
which it can be configured by opening the AMC Control Panel applet from the Windows
Control Panel. Alternatively, right-click the video image in Internet Explorer.

Other methods of accessing the video stream

Video/images from the AXIS 210/210A/211/211A can also be accessed in the following
ways:
• If supported by the client, the AXIS 210/210A/211/211A can use Motion JPEG server
push to display video. This option maintains an open HTTP connection to the browser
and sends data as and when required, for as long as required.
• As single JPEG images in a browser. Enter e.g. the path:
http://<IP address>/axis-cgi/jpg/image.cgi?resolution=320x240
• Windows Media Player. This requires AMC and the MPEG-4 decoder to be installed.
The paths that can be used are listed below in the order of preference.
• Unicast via RTP: axrtpu://<IP address>/mpeg4/media.amp
• Unicast via RTSP: axrtsp://<IP address>/mpeg4/media.amp
• Unicast via RTSP, tunneled via HTTP: axrtsphttp://<IP address>/mpeg4/media.amp
• Unicast via RTSP, tunneled via HTTPS: axrtsphttps://<IP address>/mpeg4/media.amp
• Multicast: axrtpm://<IP address>/mpeg4/media.amp
AXIS 210/210A/211/211A - Video Streams
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

211a210a211

Table of Contents