8-8 ENGINE REMOVAL/INSTALLATION
Torque - Front Engine Bracket Bolts (Left) [G]: 25 N·m (2.5
kgf·m, 18 ft·lb)
Front Engine Mounting Bolt [H] (Left): 44 N·m (4.5
kgf·m, 32 ft·lb)
Run the leads, cables, and hoses correctly (see Cable,
Wire, and Hose Routing section in the Appendix chapter).
Install the engine ground lead [A] as shown.
45 ∼ 55° [B]
Torque - Engine Ground Lead Terminal Bolt: 9.8 N·m (1.0
kgf·m, 87 in·lb)
Install the removed parts (see appropriate chapters).
Fill the engine with engine oil (see Engine Oil Change in
the Periodic Maintenance chapter).
Fill the engine with coolant and bleed the air from the cool-
ing system (see Coolant Change in the Periodic Mainte-
Throttle Cables (see Throttle Control System Inspection
in the Periodic Maintenance chapter)
Clutch Cable (see Clutch Operation Inspection in the Pe-
riodic Maintenance chapter)
Drive Chain (see Drive Chain Slack Adjustment in the
Periodic Maintenance chapter)
Idle Speed (see Idle Speed Adjustment in the Periodic