Clutch Cover Removal
Drain the engine oil (see Engine Oil Change in the Peri-
odic Maintenance chapter).
Right Frame Cover (see Frame Cover Removal in the
Lower Fairing (see Lower Fairing Removal in the Frame
Clutch Cable Holder Bolts [A]
Clutch Cable Lower End [B]
Remove the clutch cover bolts [A].
Turn the release lever [A] counterclockwise, and remove
the clutch cover [B].
About 90° [C]
Clutch Cover Installation
Clean off any oil or dirt and apply liquid gasket to the fol-
Crankcase Halves Mating Surface [A]
Crankshaft Sensor Lead Grommet [B]
Sealant - Liquid Gasket, TB1211F: 92104-0004
Be sure that the dowel pins [C] are in position.
Replace the clutch cover gasket with a new one.
Install the clutch cover.
Torque - Clutch Cover Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Install the clutch cable lower end to the clutch cable
Apply a non-permanent locking agent to the clutch cable
Torque - Clutch Cable Holder Bolts: 9.8 N·m (1.0 kgf·m, 87
Install the removed parts (see appropriate chapters).