3-104 FUEL SYSTEM (DFI)
Throttle Body Assy
Install the throttle body assy holder clamp bolts [A] so that
their bolt heads [B] face outward.
Install the throttle body assy onto the holder securely.
Torque - Throttle Body Assy Holder Clamp Bolts: 2.0 N·m
(0.20 kgf·m, 18 in·lb)
Turn the throttle grip to make sure that the throttle valves
move smoothly and return by spring force.
Check the throttle body assy for fuel leakage.
Fuel spilled from the throttle body assy is haz-
Run the leads and hoses correctly (see Cable, Wire, and
Hose Routing section in the Appendix chapter).
Install the other removed parts (see appropriate chap-
Throttle Grip Free Play (see Throttle Control System In-
spection in the Periodic Maintenance chapter)
Idle Speed (see Idle Speed Adjustment in the Periodic
Operation with incorrectly routed or improperly ad-
justed cables could result in an unsafe riding con-
dition. Be sure the cables are routed correctly and
Throttle Body Assy Disassembly
Do not remove, disassemble or adjust the main
throttle sensor [A], subthrottle sensor [B], sub-
throttle valve actuator [C], throttle link mechanism
[D] and throttle body assy [E], because they are
adjusted or set at the manufacturer. Adjustment
of these parts could result in poor performance,
requiring replacement of the throttle body assy.
Never drop the throttle body assy , especially on a
hard surface. Such a shock to the body assy can