Operating Jvc's Audio/Video Components; Operating Audio Components; Dimmer - JVC RX-5032VSL Instructions For Use Manual

Operating JVC's Audio/Video Components

You can use the remote control to operate other JVC
components.

Operating Audio Components

IMPORTANT:
To operate JVC's audio components using this remote control:
• You need to connect JVC's audio components through the COMPU
LINK (SYNCHRO) jacks (see page 26) in addition to the
connections using cables with RCA pin plugs (see page 7).
• Aim the remote control directly at the remote sensor on the receiver.
• If you use the buttons on the front panel, the remote control will not
operate that source. To operate a source with the remote control, the
source must be selected using source selection buttons on the
remote control.
• To operate the cassette deck or CD recorder using the COMPU
LINK remote control system, set the source name correctly. (See
page 10.)
• Refer also to the manuals supplied with your audio components.
TEST FRONT L
1
CENTER
4
MENU SURR L
7/P
ENTER
10
RETURN
REW
REC PAUSE
TAPE/CDR
FM/AM TV SOUND
FM MODE SURROUND
DIMMER TV/VIDEO
VCR CH TV CH
REMOTE CONTROL RM-SRX
29
A/V CONTROL
STANDBY/ON
RECEIVER
FRONT R AUDIO
2 3
SUBWFR
TV
5 6
SURR R
VCR
8 9
LEVEL
DVD
0 10
100
SLEEP
FF
CD-DISC
CD DVD
ANALOG
/DIGITAL
VCR
SURROUND
DSP
/DSP
OFF
MUTING
TV VOLUME
VOLUME
5032U
Sound Adjustment
You can always use the following buttons:
SURROUND Turn on and select the Surround
modes.
DSP Turn on and select the DSP modes.
SURROUND/DSP OFF Turn off the Surround or DSP
modes.
After pressing SOUND, you can use the following buttons for
the sound adjustment:
SUBWFR = LEVEL 9/(
FRONT L = LEVEL 9/(
FRONT R = LEVEL 9/(
CENTER = LEVEL 9/(
SURR L = LEVEL 9/(
SURR R = LEVEL 9/(
TEST
Note:
When you use the 10 keys to operate your target source after sound
adjustments, press the source selection button first so that the 10
keys work for the target source.
Tuner
You can always use the following buttons:
FM/AM Alternate between FM and AM.
After pressing FM/AM, you can use the following buttons for
the tuner operations:
1 – 10, +10 Select a preset channel number directly.
• For channel number 5, press 5.
• For channel number 15, press +10, then
5.
• For channel number 20, press +10, then
10.
FM MODE Change the FM reception mode.
Adjust the subwoofer output
level.
Adjust the left front speaker
output level.
Adjust the right front speaker
output level.
Adjust the center speaker
output level.
Adjust the left surround speaker
output level.
Adjust the right surround
speaker output level.
Turn on or off the test tone
output.