General Information; Elivery; Cold Water Combination Valve - Ariston Unvented Hot Water Storage Cylinders Instructions For Installation And Use Manual

www.tradeplumbing.co.uk Call Sales On 08708034288
1. GENERAL
INFORMATION
1.2 D

ELIVERY

www.tradeplumbing.co.uk Call Sales On 08708034288
This manual is an integral and essential part of the product. It should be kept
with the appliance so that it can be consulted by the user and our authorised
personnel.
Please read carefully the instructions and notices about the appliance
contained in this manual, as they provide important information regarding the
safe installation, use and maintenance of the cylinder.
Failure to do so may invalidate the guarantee.
The Ariston range is available in the following options:
The Wall-hung ProTech range (50, 75, 100 litre models), which are supplied
as follows;
One box containing;
1) The cylinder with factory fitted temperature & pressure relief valve,
immersion heater and thermostat with thermal cut-out.
One box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve and tundish), instructions for installation, servicing and use and the
Benchmark Log Book).
The Contract ProTech floor-standing range (100, 125, 150, 200 and 300 litre
models), which are supplied as follows;
One box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
One box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve and tundish), motorised valve (indirect only). Immersion heater(s)
and thermostat(s) with thermal cut-out(s), cylinder thermostat with
thermal cut-out (indirect only), feet (x3), instructions for installation,
servicing and use and the Benchmark Log Book.
The High Capacity ProTech floor-standing range (500 litre models), which
are supplied as follows;
One box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve and tundish), motorised valve (indirect only). Immersion heater(s)
and thermostat(s) with thermal cut-out(s), cylinder thermostat with
thermal cut-out (indirect only), feet (x 3), instructions for installation,
servicing and use and the Benchmark Log Book.
The Classico and Primo floor-standing ranges (125, 150, 200 and 300 litre
models).
Are supplied with the following;
One box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
One box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve and tundish), motorised valve (indirect only). Immersion heater(s)
and thermostat(s) with thermal cut-out(s), cylinder thermostat with
thermal cut-out (indirect only), feet (x3), instructions for installation,
servicing and use and the Benchmark Log Book.
3