Playing Discs - Sony RMT-D145E Service Manual

QQ
3 7 63 1515 0
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 19 to
22 ( through ).
D
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2 D
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 20 to
22 ( through ).
B D
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
D-PCM
MPEG:
DTS: DOLBY DIGITAL
B-2 C-2
• D-PCM (page 69)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 69)
TE
L 13942296513
24

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Power
indicator A
[/1 H
Z
[/1
AUDIO
H
1
Turn on your TV.
2
Press [/1.
The player turns on and the power
indicator lights up in green.
www
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
N
When using an amplifier (receiver)
.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
26
http://www.xiaoyu163.com
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
MPEG: PCM
DTS: OFF
OFF
ON
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 20 to
22 ( through ).
B D
B-2 C-2
• OFF (page 69)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 69)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
"MPEG" setting (page 69).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 20 to
22 ( through ). Each of these is the
B D
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 63 for using the Setup Display.
Audio Connection (pages 19 to 22)
A
• No additional settings are needed.
B-1 C-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 68)
4
Press A on the player, and place a
disc on the disc tray.
With the playback side facing down
5
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 29. For VIDEO CDs, see page 30.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power off function).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
• Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 49).
• Do not play DTS sound tracks without first
x ao u163
connecting the player to an audio
y
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
i
jack even if "DTS" in "AUDIO SETUP" is
set to "OFF" in the Setup Display (page 69),
and may affect your ears or cause your
speakers to be damaged.
http://www.xiaoyu163.com
2 9
8
• If the sound distorts even when the volume
is turned down, set "AUDIO ATT" to "ON"
(page 68)
B-2 C-2 D
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 68)
• Set "DIGITAL OUT" to "ON" (page 68)
Q Q
3 6 7 1 3 1 5
Notes on playing DTS sound tracks on a
DVD
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD with DTS sound
tracks, set "DTS" to "ON" in "AUDIO
SETUP" (page 69).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 69). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Additional operations
Z
./>
REPLAY
X
H
x
To Operation
Stop Press x
Pause Press X
Resume play after Press X or H
pause
Go to the next chapter, Press >
track, or scene in
continuous play mode
Go back to the Press .
previous chapter,
track, or scene in
continuous play mode
co
Press Z
Stop play and remove
the disc
Replay the previous Press REPLAY
.
scene (DVD only)
1-6
9 4 2 8
0 5 8 2 9 9 4 2 8
25
z Hint
The Replay function is useful when you want to
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with
some scenes.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
[/1
ENTER
O RETURN
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
on the front panel display.
The Z button on the player or the remote does
not work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again. m
Note
Even if you select "RESET" under "SETUP" in the
Control Menu (page 64), the disc tray remains
locked.
27
9 9
9 9