Lantronix SecureLinx Quick Start Manual page 7

S L B B r a n c h O f f i c e M a n a g e r
CONFIGURING NETWORK (IP) SETTINGS CONTINUED
5. Press the down arrow button to display the Subnet Mask setting.
6. Edit the Subnet Mask in the same fashion as the IP address and press the down arrow.
7. Edit the Gateway and DNS settings.
8. Press the down arrow after the DNS 3 setting to go to the Save settings?
Yes/No prompt.
9. Select Yes at the prompt and press Enter to save changes.
Repeat steps 1-8 for the other options (console port and date/time).
Note: Another option, is to restore factory defaults. The default password for this
action is 999999. See the SLB User Guide for more details.
After you save the values for your console manager, changes take effect immediately.
10
Q u i c k S t a r t G u i d e
LOGGING IN TO THE SLB WEB PAGE
This section includes instructions for accessing both the web page and the
command line interfaces. You can use either method to configure all parameters.
To log in to the SLB web page:
1. Open a web browser (Netscape
8.1 Navigator and later or
Internet 6.0 Explorer and later).
2. In the URL field, type https://
followed by the IP address of
your SLC.
3. At the first login, enter
sysadmin (all lower case) as the
user and PASS (all upper case),
the default factory password.
The first time you log in, the SLC Quick Setup page displays. Subsequent logins
display the SLC Home Page. (To display Quick Setup again, click the Quick Setup tab.)
4. Do one of the following:
• To bypass the Quick Setup page and go directly to configuring the SLC, click
the Accept default Quick Setup settings checkbox and click Apply.
• Update basic network parameters, if desired, and click Apply.
W W W . L A N T R O N I X . C O M
11