Rogers Jasco Setup Manual

In-wall switch or dimmer

Table of Contents

Download this manual

Set-Up Guide

In-Wall Switch or Dimmer – Jasco

Package Contents:

In-Wall Switch or Dimmer device

Manufacturer's Installation Guide – for installing the device

Rogers Set-Up Guide – for pairing the device to your Rogers Smart Home Monitoring system

Please refer to the enclosed Manufacturer's Installation Guide.

•

To avoid injury, read all set-up and safety information included in your package before setting up

and using your device.

•

Please follow all provincial and/or municipal regulations when installing your device.

•

If you encounter a problem setting up your in-wall light switch or dimmer, please call

Rogers Technical Support at 1-888-764-3771.

Once the device has been physically installed and tested, follow the below steps to connect/pair it to

your Rogers Smart Home Monitoring Touchpad.

In-Wall Auxiliary Switch

Note: If you are installing the In-wall Switch or Dimmer to control a light or electrical device that is

also controlled from a 2nd or 3rd location (i.e. a 3-way or 4-way switch set-up), installation of the

In-wall Auxiliary Switch is required at these additional locations for integration with your Smart

Home Monitoring System.

For installation of the In-Wall Auxiliary Switch, please refer to the Manufacturer's Installation Guide

provided with that device. Note: the Auxiliary Switch does not need to be paired to your Smart

Home Monitoring system.

In-Wall Switch or Dimmer – Jasco



Table of Contents

Do you have a question about the Jasco and is the answer not in the manual?

Page 1 Package Contents: In-Wall Switch or Dimmer device Manufacturer’s Installation Guide – for installing the device Rogers Set-Up Guide – for pairing the device to your Rogers Smart Home Monitoring system Device Installation Please refer to the enclosed Manufacturer’s Installation Guide.
Page 2 Release the top of the rocker once the LED starts blinking. Proceed to the “Connecting the Device to Your System” section of this guide. Circle indicates air gap switch.   In-Wall Switch or Dimmer – Jasco...
Page 3 Enter your Master Access Code (4-digit code). Your Master Access Code is the same code that you use to manage your system. Select Home Devices under the Categories list. Scroll down and select Lighting, then select Add Lights. In-Wall Switch or Dimmer – Jasco...
Page 4 (e.g. Living Room Light). If you have a dimmable light, ensure that “Dimmable” is set to “Yes” Click Next when done. Click Return to Menu to complete the pairing of the device.   In-Wall Switch or Dimmer – Jasco...
Page 5 Touchpad, your smartphone app and through the Web Conrol Centre. In-Wall Light Switch Features Automate your In-Wall Light Switch using “Rules” on the Web Control Centre at smarthome.rogers.com. Rule Creation Set-up rules such as: •...