Functional Description; Installing Or Removing Battery Cartridge - Makita BLM430 Instruction Manual

FUNCTIONAL DESCRIPTION

Installing or removing battery cartridge

CAUTION:
Always switch off the tool before installing or
•
removing the battery cartridge.
Make sure that you lock the battery cover before
•
use. Otherwise, mud, dirt, or water may cause
damage to the product or the battery cartridge.
3
1. Battery cover locking lever
2. Battery cartridge
3. Battery cover
012296
To install the battery cartridge;
1. Pull the battery cover locking lever toward
yourself and open the battery cover.
2. Insert the battery cartridge in the direction shown
in the figure until a click is heard.
1
012297
3. Insert the lock key in the place shown in the figure
as far as it will go.
4. Close the battery cover and push it on until it is
latched with the locking lever.
To remove the battery cartridge from the mower;
1. Pull the battery cover locking lever toward
yourself and open the battery cover.
2. Pull out the lock key.
2
1
1. Lock key
3. Withdraw it from the tool while sliding the button
on the front of the cartridge.
4. Close the battery cover.
Battery converters (optional accessory)
WARNING:
Before installing or removing the battery converters
•
BCV01/BCV02, remove the lock key.
BCV01 (optional accessory)
WARNING:
When using the BCV01, never attach it to any part
•
of your body. Attaching the BCV01 to any part of
your body may cause a serious injury.
3
012379
Slide the battery converter BCV01 into the installation
hole until it stops.
012380
Open out the battery cover on the mower and then slide
all the way and click the product mounting adapter of the
BCV01 into the battery port on the mower.
Run the cord of the BCV01 through the slit in the battery
cover and close the battery cover.
3
012381
Fit the cord of the BCV01 into the upper holders on the
handle.
5
1. Battery
1
converter
(BCV01)
2. Installation hole
3. Hook
2
1. Battery cover
2
1
2. Product
mounting
adapter of the
BCV01
1. Cord
2. Slit
1
3. Upper holders
2