Download  Print this page

Phone Setup - Siemens S40 User Manual

Hide thumbs
Also See for S40
User manual - 50 pages
User manual - 44 pages
User manual - 50 pages



Phone setup

Enter the Setup menu
To save your battery and thus
by pressing »MENU«
increase both conversation and
Select »Phone setup«
standby times you can choose to
have the backlight permanently
switched off.
Select »Language« to change the
menu language of your phone.
This option is effective only if your
phone is connected to a handsfree
device. See specific user guides for
Under »IrDA Nickname« you can
further information.
enter an ID name by which you
want other IrDA devices to identify
your mobile phone.
Make a welcome greeting on your
By selecting »Printer« you get
phone according to your own wish-
the option to define the protocol
es. Delete the old greeting by hold-
language of the printer you want to
ing down »CLEAR«, enter the new
greeting via the keypad, and con-
If you select »Test page«, a stan-
firm by pressing »OK«. (This func-
dard test page will automatically be
tion may not be available on all net-
sent to the printer.
Setup menu
Signal diode
The LED on the top of the phone
This submenu allows you to
provides information about the fol-
choose between different symbols
for the battery and the signal
strength indicators.
• Green flash
In contact with a network
Owner ID
• Fast green flash
Incoming call
You can store an owner ID in your
• Very fast green flashes
phone to be shown when you
New information, e.g.
switch on the phone. Select
a missed call or a new message.
»Define« to enter the necessary
• Red flash
information, which corresponds to
No contact with a network
an address book entry.
• Fast red flash
Low battery
activate/deactivate the function.
Select individually whether you
When the function is activated
want these indicators to be active
press »OWNER« during the power
or not.
up phase to see the contents of
your owner ID.
can be sent as a business card via
IrDA (see p. 33).
Setup menu
Select »Show at power up« to
The contents of the Owner ID
Facts & Tips
• If, by mistake, you select a language
which you do not understand, you can
always return to the original SIM card
language by pressing the following
, in standby
• The owner ID is stored in the inter-
nal memory of the phone and will
thus not be shown in the display if
you use your SIM card in another


Table of Contents

   Also See for Siemens S40

   Related Manuals for Siemens S40

Comments to this Manuals

Symbols: 0
Latest comments: