Download  Print this page

Siemens S40 User Manual Page 29

Hide thumbs
Also See for S40
User manual - 50 pages
User manual - 44 pages
User manual - 50 pages


Tones setup
Press »NO« to return to the com-
poser editor where you can make
Enter the Setup menu
further corrections, if required.
by pressing »MENU«
Press »YES« to leave the com-
Select »Tones setup«
poser without saving anything.
Create melody (Continued)
• Tones sound: Select whether you
want to hear the tones or not when
composing your melody. Even if
you have switched the tones sound
off, you will still be able to listen to
your composition by pressing 8
(Play back).
• Save: Give your melody a name
and press »SAVE«. If you do not
want to give the melody a name of
your own choice, it will be stored
under the name »My melody 1«.
If you press »EXIT« after complet-
ing your composition, you will be
asked whether you want to leave
the composer without saving your
new/edited melody.
Setup menu
Key tone
Factory settings
Select whether you want a tone to
Ringing tone
be heard when you press a key. You
- volume:
can select between 7 different
- pattern, line 1: Standard 2
tones, DTMF and off.
- pattern, line 2: British 1
Message tone
Silent mode
- volume:
- pattern:
Choose whether you want the
Broadcast tone
selected tones to be on or off.
- volume:
- pattern:
Key tone:
Select whether you want the built-
in trembler to be active at incoming
- Line 1:
calls, messages, or events.
- Line 2:
- Messages:
- Broadcasts:
- Events:
Setup menu
Simple 1
Keytone 1
Facts & Tips
• If you are interrupted while compos-
ing your melody, e.g. by an incoming
call, your composition will be stored
under the name
• Remember that you can disable all
selected tones by pressing »
and then
. Just press these keys
again in the same order to revert to
your original settings.
• Returning to the factory settings will
not affect the ringing tone assigned to
a group in your address book.


Table of Contents

   Also See for Siemens S40

   Related Manuals for Siemens S40

Comments to this Manuals

Symbols: 0
Latest comments: