Lincoln Electric VANTAGE 500 Operator's Manual page 29

Lincoln electric welder user manual
Hide thumbs Also See for VANTAGE 500:
Table of Contents

Advertisement

D-3
Remove the Filter
Remove the Filter
Rotate the
filter while
pulling
straight out.
Clean Both Surfaces of the Outlet Tube
Clean Both Surfaces of the Outlet Tube
and Check the Vacuator™ Valve
and Check the Vacuator™ Valve
Wipe both sides
of the outlet
tube clean.
Outer edge of the
outlet tube
If your air cleaner is equipped with a Vacuator Valve
Inspect the Old
Inspect the Old
Filter for Leak Clues
Filter for Leak Clues
MAINTENANCE
Service Instructions
Service Instructions
Single- and Two-Stage Engine Air Cleaners
Single- and Two-Stage Engine Air Cleaners
Inner edge of the
outlet tube
VANTAGE
Inspect the New Filter for Damage
Inspect the New Filter for Damage
Insert the New Radial Seal Filter Properly
Insert the New Radial Seal Filter Properly
Caution
Caution
NEVER use the service cover to
NEVER use the service cover to
push the filter into place! Using
push the filter into place! Using
the cover to push the filter in could
the cover to push the filter in could
cause damage to the housing, cover
cause damage to the housing, cover
fasteners and will void the warranty.
fasteners and will void the warranty.
Check Connectors for Tight Fit
Check Connectors for Tight Fit
®
500
D-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

11467

Table of Contents