Using The Media Card Reader; Inserting A Memory Card; Removing A Memory Card; Power Management - Lenovo E31-70 User Manual

Using the media card reader

Your computer supports the following cards:
• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• SD eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)
Note: Your computer does not support the Content Protection for Recordable
Media (CPRM) feature for the SD card.
Attention: When transferring data to or from a flash media card, such as an SD
card, do not put your computer in sleep or hibernation mode before the data
transfer is complete. To do so might cause damage to your data.

Inserting a memory card

To insert a memory card, do the following:
1. Make sure that the card is correctly oriented.
2. Insert the memory card until it touches the bottom of the slot.

Removing a memory card

To remove a flash media card, do the following:
Gently pull the memory card out of the memory card slot.
Note: If you do not remove the card from your computer after you eject the card
from the Windows operating system, the card can no longer be accessed. To
access the card, you must remove it and then insert it again.

Power management

Use your computer with AC power whenever AC power is available. Use your
computer with battery power when AC power is not available.
16
User Guide