Listen To An External Device; Product Information; Specifications - Philips DTM3170 User Manual

» The minute digits are displayed and
begin to blink.
5
Press / to set the minute.
6
Press SLEEP/TIMER to confirm.
» The alarm timer is set and activated.
Note
•
To exit the alarm timer setting without storing, press
MENU/
.
Activate and deactivate the alarm
timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the alarm
timer.
» If the alarm timer is activated,
displayed
» If the alarm timer is deactivated,
disappears.
Note
•
If CD/USB/DOCK source is selected, but no disc is
placed or no USB/iPod/iPhone/iPad is connected, the
FM TUNER is selected automatically.

Listen to an external device

You can also listen to an external audio device
through this docking system.
1
Press USB/AUDIO IN repeatedly to select
audio in source.
2
Connect the supplied MP3 link cable to:
the AUDIO IN jack on the unit
•
• the headphone jack on the device
3
Start to play the device. (See the device
user manual).
9 Product
•
Product information is subject to change without prior
notice.

Specifications

Amplifier
Maximum Output Power
Frequency Response
is
Signal to Noise Ratio
AUDIO IN Input
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
Tuner
Tuning Range
Tuning grid
information
Note
Semiconductor
12 cm/8cm
CD-DA, CD-R, CD-
RW, MP3-CD
24 Bits / 44.1 kHz
<1%
60 Hz -16 kHz (44.1
kHz)
>65 dBA
150 W
100 Hz - 16
kHz, ±3 dB
>76 dB
<600 mV RMS
FM: 87.5 -
108 MHz
50 KHz
EN 15