Component Identifi Cation - Kärcher HD 2.8/20 Pb Operator's Manual

Spray Gun
Trigger
High Pressure
Hose
Pump — Develops high pressure.
Starter Grip— Used for starting the engine manu-
ally.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents.
6
COMPONENT IDENTIFICATION
Straight
Through
Wand
Starter Grip
9.800-083.0 • Rev. 04/10A
Unloader
Pump Protector
Pump
Pressure
Nozzle
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump discharge nipple (detergent injector nipple) and
the other end to spray gun.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water may leak from pump protec-
tor. Warm water will discharge from pump protector
onto fl oor. This system prevents internal pump
damage from high temperatures.
Detergent
Injector
Inlet
Screen
Garden Hose
(not included)
Detergent
Bucket (not
included)