[Auto Standby]: Enable or disable auto
standby. If enabled, this player switches
automatically to standby after 15
minutes of inactivity (for example, in
pause or stop mode).
[DivX(R) VOD Code]: Display
registration code and
Select [Setup] > [Video] to access the
video setup options.
[TV System]: Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your
[Aspect ratio]: Select a picture display
format to fit the TV screen.
[Progressive]: Turn on or off the
progressive scan mode. If a progressive
scan TV is connected to this player,
turn on the progressive scan mode.
[Picture Setting]: Select a predefined
color setting, or customize a setting.
To achieve progressive scan pictures, make sure that
your TV supports the progressive scan feature, and
your TV is connected to this player through the Y/Pb/
Select [Setup] > [Audio] to access the
audio setup options.
[Analogue Output]: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
[Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
[Digital Output] - Select a type
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats; [PCM
Only] - Downmix to two-channel
[LPCM Output] - Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality. [LPCM Output] is
enabled only when [PCM Only] is
selected under [Digital Output].
[Volume]: Change a volume level.
[Sound Mode]: Select a preset sound
[Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Night mode is only available for Dolby encoded DVD
Select [Setup] > [Preference] to access
the preference setup options.
[Audio]: Select an audio language for
[Subtitle]: Select a subtitle language for
[Disc Menu]: Select a menu language
for a video disc.