7. Gyro Offset Adjustment
Adjustment location: EIS Adj of computer screen
Measuring location: Computer screen,
Privacy mask
Measuring equipment:
Tele
Note: Do not shake the camera while gyro offset is being
Privacy Mode
adjusted. There is no gyro gain adjustment.
Adjustment method:
Wide
1. It turns on power.
Up
2. Connect the camera's USB terminal to the computer'
USB connector.
Left
Right
3. Double-click on the DscCalDi.exe.
Down
4. Select "EIS Adj" on the LCD "Test".
OK
5. Gyro offset adjustment value will appear on the screen.
6. Click the OK.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
409<=H1<=614, 409<=V1<=614
-
-
13