Video Converter - RCA M4001 User Manual

Listening, Viewing and Recording

Video Converter

Your video has to be converted to optimum
format before transferring to this player for
EN
playback. To do so, you need to install the RCA
Video Converter in your computer. You can install
the Converter from the music management CD or
go to http://www.rcaaudiovideo.com/software to
download the most updated Converter for
installation.
1. Load the music management CD included with
this player in your computer. Installation will
start automatically. Follow the instructions on
the screen to install the converter.
2. Launch the video converter after installation
has succeeded and connect the player to the
computer.
3. Drag-and-drop video files from the Windows
Explorer to the list control panel.
Drag-and-drop here
Select the
target folder
4. Select the target folder and enter the name for
output file by clicking "Browse".
• If you want to transfer the video output file to
the player automatically after conversion is
complete, check the box underneath to do so.
5. Select the type of player from the pull-down
menu under "Player". Select "OPAL" for this
player. Optimum settings for file conversion
will be selected automatically.
19
6. To edit the name
of the output
video, click on the
box next to
destination at the
lower right corner.
• If you prefer to
convert only a
portion of the
video file, select
the start and end
time for the conversion at the lower right
corner.
• To resize the output video, click "Video Mode".
Select "Full Screen" to fully utilize the screen
of the player, yet part of the video may be
cropped during video playback. Select "Full
Image" to keep the ratio of the video size
same as the input video, yet the screen of the
player may not be fully utilized.
• Select the quality level of the output video
among High, Medium or Low from the pull
down menu.
7. Click "Convert" to start the file
conversion.