Canon Speedlite 550EX Instructions Manual page 89

FEB (Flash Exposure Bracketing)
-------
0-50-711.523. I '1318 m
5
Check that the subject is within the
flash range displayed on the 55QEX's
LCD panel.
bO S6 Y-t •
6
Check that the
t
and
~
icons are
displayed in the viewfinder, then take
the picture.
7
Take the remaining two bracketed
shots. (If
necessary, repeat steps 4
to 6.)
The
i'niIge
was
rermved due
The image was
roomed
We
The
image
W.ti
Il!IflM!d due
to copyright
restridions
to copyright restrictions
to copyright restridions
Correct exposure.
Underexposure by 1 stop. Overexposure
by
1 stop.
Ell:
... ...
The film advances accordirJg
to
the camera's current film advance made.
Before takirJg the picture. make sure the flash is ready by chllCkirJg that the 550EX's
pilot lamp is red or the
f
icon is displayed in the viewfinder. If tht! flash is not ready,
only normal AE mode pictures can be taken. The 0 (single·frame) film advance
mode is recommended.
When the flash is ready, you can continue taking the bracketed flash shots.
Custom FUIICtion CF-t can prevent the FEB setting from callCelirJg automatica lly after the three
bracketed nash shots are taken. See page 113 .
CustOOl FUIICtion CF·2 can change the sequence of tht! bracketed flash shots See page 113.
89