Installation Instructions - Maytag MTW6300TQ Bravos Service Manual

WARNING
Excessive Weight Hazard
Use two or more people to move and
install washer.
Failure to do so can result in back or
other injury.
NOTE: To avoid floor damage, set the washer
onto cardboard before moving across floor.
IMPORTANT:
• Be sure the foam shipping base has been
removed from the bottom of the washer as
directed in the Unpacking Instructions.
• If foam shipping base has not been re-
moved, be sure lid is secured with tape be-
fore laying washer on its back.
• Removing the foam shipping base is nec-
essary for proper operation.
REMOVE SHIPPING BASE
AND PACKING RING
1. Place cardboard supports from shipping
carton on floor behind washer for sup-
port.
2. Secure the lid with tape.
3. Using 2 or more people, tip the washer
onto its back and place on cardboard
supports.
4. Remove foam shipping base.
5. Set washer upright.

INSTALLATION INSTRUCTIONS

6. Remove tape from lid. Open lid and re-
move foam packing ring from washer tub.
Keep foam packing ring in case you need
to move the washer in the future.
CONNECT THE DRAIN HOSE
Proper connection of the drain hose protects
your floors from damage due to water leak-
age. Read and follow these instructions.
The drain hose is connected to your washer
and is stored inside the washer cabinet.
2-5