Accessories; Section C - Lincoln Electric INVERTEC V300-PRO SVM105-B Service Manual

C-2
OPTIONS / ACCESSORIES
CABLE PLUGS
Cable Plug Kit for 1/0-2/0 cable (K852-70) attaches to
welding cable to provide quick disconnect from
machine.
Cable Plug Kit for 2.0-3/0 cable (K852-95).
NOTE: Two K852-70 plugs are included with the V300-I.
K864 REMOTE CONTROL
ADAPTER
Plugs into the 14-pin receptacle on the rear panel of the
Invertec. Adapter splits remote control circuitry to a 6-
pin receptacle and to a 14-pin receptacle. Adapter per-
mits remote output control of Invertec by means of
K857 Remote Control, K812 Hand Amptrol or K870
Foot Amptrol. Allows remote while using LN-7 K480-7
control cable.
K867 UNIVERSAL ADAPTER
PLUG
Consisting of a 14-pin plug connected to labeled wires,
the adapter allows user connection of any suitable
accessory or wire feeder to the remote control, contac-
tor, and auxiliary power circuitry of the Invertec.

ACCESSORIES

K876 REMOTE CONTROL
ADAPTER
For operating an LN-25 wire feeder. The adapter
connects to the 14-pin receptacle of Invertec power
sources and to the 6-pin connector of the LN-25
K432 remote control cable.
K900-1 DC TIG STARTER
Solid state GTAW starting unit. Rated 300 A, 60%.
V300-PRO
C-2