Cisco EX60 Administrator's Manual page 65

Telepresence system
Hide thumbs Also See for EX60:
Table of Contents

Advertisement

Cisco TelePresence System EX Series
Contents
Conference [1..1] MaxTotalTransmitCallRate
This configuration applies when using a video system's built-in multiSite feature (optional) to
host a multipoint video conference.
Specify the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among
all active calls at any time. This means that the individual calls will be up-speeded or down-
speeded as appropriate when someone leaves or enters a multipoint conference, or when a call
is put on hold (suspended) or resumed.
The maximum transmit bit rate for each individual call is defined in the Conference
maxTransmitCallRate setting.
Requires user role: ADmIn
Value space: <64..10000>
Range: Select a value between 64 and 10000.
Conference 1 MaxTotalTransmitCallRate: 10000
Example:
Conference [1..1] MaxTotalReceiveCallRate
This configuration applies when using a video system's built-in multiSite feature (optional) to
host a multipoint video conference.
Specify the maximum overall receive bit rate allowed. The bit rate will be divided fairly among
all active calls at any time. This means that the individual calls will be up-speeded or down-
speeded as appropriate when someone leaves or enters a multipoint conference, or when a call
is put on hold (suspended) or resumed.
The maximum receive bit rate for each individual call is defined in the Conference
maxReceiveCallRate setting.
Requires user role: ADmIn
Value space: <64..10000>
Range: Select a value between 64 and 10000.
Conference 1 MaxTotalReceiveCallRate: 10000
Example:
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014.
Introduction
Web interface
System settings
System settings
Conference [1..1] VideoBandwidth Mode
Set the conference video bandwidth mode.
Requires user role: ADmIn
Value space: <Dynamic/Static>
Dynamic: The available transmit bandwidth for the video channels are distributed among the
currently active channels. If there is no presentation, the main video channels will use the
bandwidth of the presentation channel.
Static: The available transmit bandwidth is assigned to each video channel, even if it is not
active.
Conference 1 VideoBandwidth Mode: Dynamic
Example:
Conference [1..1] VideoBandwidth MainChannel Weight
The available transmit video bandwidth is distributed on the main channel and presentation
channel according to "mainChannel Weight" and "PresentationChannel Weight". If the main
channel weight is 2 and the presentation channel weight is 1, then the main channel will use
twice as much bandwidth as the presentation channel.
Requires user role: ADmIn
Value space: <1..10>
Range: 1 to 10.
Conference 1 VideoBandwidth MainChannel Weight: 5
Example:
Conference [1..1] VideoBandwidth PresentationChannel Weight
The available transmit video bandwidth is distributed on the main channel and presentation
channel according to "mainChannel Weight" and "PresentationChannel Weight". If the main
channel weight is 2 and the presentation channel weight is 1, then the main channel will use
twice as much bandwidth as the presentation channel.
Requires user role: ADmIn
Value space: <1..10>
Range: 1 to 10.
Conference 1 VideoBandwidth PresentationChannel Weight: 5
Example:
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
65
Administrator Guide
Setting passwords
Appendices

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex90

Table of Contents