Press the THUMBNAIL button.
The thumbnail screen appears after a few seconds.
data (p. 49)
• When you assign [DISPLAY] to the ASSIGN 1/ ASSIGN 2 button, you can turn on or off the date
and time display on the thumbnails by pressing the ASSIGN button you set.
Play back movies.
1 Press the V/v/B/b/SET buttons to select the recording media you want to play back.
: Internal memory
: Memory card
2 Press the V/v/B/b buttons to select the movie you want to play back.
Pressing the V/v/B/b buttons will show the information on the movie at the lower part of the
A Date and time of recording started
C Frame rate
D Recording mode
F Time code of recording started
Time code will not be displayed correctly when you play back recording media with no
time code, or recording media with time code that your camcorder does not support.
G DOLBY DIGITAL recording
Appears when audio is recorded in DOLBY DIGITAL.
• i appears with the movie that has been most recently played back or recorded. If you start
playing back the movie with i, you can continue playback from the previous time.
3 Press the SET button.
Your camcorder starts playing the selected movie.