Service Adjustments - Sanyo DP26649 Service Manual

GENERAL
This set has an On-screen Service Menu system included
in the CPU that allows remote operation for most of the

service adjustments.

ON-SCREEN SERVICE MENU SYSTEM
1. Enter the Service Menu:
•
Turn off the receiver and disconnect the AC power
supply.
•
While pressing the Volume "
sion, reconnect the AC power supply. The Service
Menu will now appear. The remote can now be used
to make adjustments. See Figure 1 below.
ITEM NO.
Figure 1. Service Menu Display
2. Service Adjustments:
L
•
Press the Cursor
service menu item you want to adjust. See page 4 for
the On-screen Service Menu.
•
<
Use the Cursor
< >
The or key will increase or decrease the data
sequentially.
3. Exit from the Service Menu:
•
Press the MENU key to turn off the Service Menu
display.
SERVICE ADJUSTMENTS
–
" button on the televi-
HEX DATA
TITLE
M
or key to select the desired
>
or key to adjust the data.
Menu:
Exit Service Menu
Cursor < >:
Adjust the data
Volume
– 3 –
– :
Enter Service Menu
POWER
VOL
CH
Cursor LM:
Select Item