A)
Select a wall or solid vertical surface that can support the PV-Inverter.
B)
Inverter requires adequate cooling space. Allow at least 20cm space above and below the inverter (see
figure 1).
C)
Using the mounting frame as a template, drill 4 holes as shown in figure 2.
D)
Fix the mounting frame as shown in the figure 3. Do not tighten the screws so that they are flush to the
wall. Leave 2 to 4mm exposed.
E)
Hang the inverter on the mounting frame (figure 4).
F)
Check the installation conditions
•
Do not install the PV-Inverter on a slanted surface.
•
Check the upper straps of PV-Inverter and ensure that it fits on the frame.
•
Insert safety-lock screws through the bottom section of the frame to secure the inverter (diagram 3).
•
Check that the PV inverter is mounted securely by trying to raise it from the bottom. The PV-Inverter
should remain firmly attached.
•
Select the installation location so that the status display can be easily viewed.
•
Choose a strong mounting wall to prevent vibrations while inverter is operating.
8
Figure 1
Figure 3
Figure 2
Figure 4
RADIUS Home