Safety Instructions For Installation - Miele KM 3014 Operating And Installation Instructions

Safety instructions for installation

Fit the wall units and rangehood
before fitting the cooktop to avoid
damaging the surface.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This appliance must not be installed
and used in mobile installations such as
ships etc.
~
An electric fryer must not be
installed directly next to a gas cooktop,
as the gas flames could ignite the fat in
the fryer. It is essential to maintain a
distance of at least 300 mm between
these two appliances.
~
A gas cooktop may not be built in
over a fridge, fridge freezer, freezer,
dishwasher, washing machine or
tumble dryer.
~
Ensure that the gas pipe and
electrical cable are installed in such a
way that they do not touch any parts of
the appliance which become hot. This
could cause damage.
~
The electrical cable and a flexible
gas connection pipe must be installed
in such a way so that they do not come
into contact with any moving kitchen
parts (e.g. a drawer), and cannot
become trapped.
~
Observe carefully the safety
distances given on the following pages.
30
~
Do not use any joint sealant, unless
it is expressly stated to do so by the
manufacturer. The appliance's sealing
strip ensures a sufficient seal between
the appliance and the worktop.
All dimensions in this instruction booklet
are given in mm.
,
This appliance must be installed
and connected to services in
accordance with local and national
safety and building regulations.