Download  Print this page

Getting Started; Battery Installation - Uniden uh043sx-2 Operating Manual

Hide thumbs



Uniden does not represent this product to be waterproof. Do not
expose this product to Rain or Moisture.


Your uh043sx unit uses the included NiMH battery pack for power. The unit
can be powered with optional 4 AAA ALKALINE batteries.
If you don't use the uh043sx for long periods, Uniden
recommend removing the batteries. The uh043sx is designed
to retain the previous user settings. This feature will continue to
use a small amount of battery power while the unit is
switched off.
To avoid damage to the unit do not mix old and new batteries.
To install the batteries:
1. Make sure your radio is off.
2. Release the battery cover clip, then remove the
battery cover.
3. Insert NiMH battery pack according to the
orientation on the battery pack.
Insert 4 AAA ALKALINE batteries (not included)
according to the polarity symbols inside the battery
4. Align the battery cover tabs with the uh043sx tab
holes then replace the cover clip.
Do not charge alkaline or non rechargeable batteries.



  Also See for Uniden uh043sx-2

  Related Manuals for Uniden uh043sx-2