Adjustment Method - Panasonic TX-32LX60F Service Manual

Colour lcd television
Hide thumbs Also See for TX-32LX60F:
Table of Contents

Advertisement

Adjustment Method

How to enter Service 1
Set the Bass to maximum position, set the Treble to minimum position then keep pressing the INDEX button on the
remote control and press the down button (-/v) on the TV set, this will place the TV set into the Service Mode 1.
Key Command
Press the RED / GREEN buttons to step up / down through the functions.
Press the YELLOW / BLUE buttons to alter the function values, to alter White Rasters use +/- buttons
Press the OK button after each adjustment has been made to store the required values.
To exit the Service Mode, press the "N" button.
Keep adjusting sequence: DVCO, Sub-Contrast, other items.
Item
Sub-Contrast
DVCO
Highlight
Lowlight
Sub-Brightness
White Balance Adjustment
Instrument
Remote Control
LCD WB meter (Minolta CA-210 or equivalent)
Condition
Switch on the TV Set. Enter Service1. Step down to Highlight line and keep the aging time more than 20 minutes.
Procedure
After aging time above set White Raster No.12 for Highlight and No.4 for Lowlight
to store.
Put Minolta Sensor to the center of the LCD Panel with 25mm gap between Minolta Sensor and LCD Panel. Adjust "x"
and "y" values by changing Red and Blue values.
Press OK button to store setting.
Setting indication
Note: All setting values are approximate
Sub-Contrast
23
DVCO
4
High
12
0415
0410
Low
4
0056
0064
Sub-Brightness
0
Highlight
Lowlight
Receive a 80% white level Philips Pattern with correct
sound system (B/G, D/K) via aerial input. For Sub-
Contrast alignment press "Blue" button, wait until the
figure colour is changed from red to black colour.
Receive a 80% white level Philips Pattern via aerial
input. For DVCO alignment press "Blue" button, wait
until the figure colour is changed from red to black
0425
For correct setting see White Balance Adjustment
0043
Item
Value
x
0,275±0,005
y
0,275±0,005
x
0,275±0,005
y
0,285±0,005
9
Settings / Special features
Press the OK.
colour. Press the OK.
Optimum setting.
High
12
Press the OK button
Low
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx-32lx60pTx-26lx60pTx-26lx60fTx-32lx6fTx-26lx6f

Table of Contents