Removing Jumper Cables - Lincoln 2010 MKX Owner's Manual

Ford
Hide thumbs Also See for 2010 MKX:
Table of Contents

Advertisement

Roadside Emergencies
Jump starting
1. Start the engine of the booster vehicle and run the engine at
moderately increased speed.
2. Start the engine of the disabled vehicle.
3. Once the disabled vehicle has been started, run both engines for an
additional three minutes before disconnecting the jumper cables.
Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from the ground metal surface.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
2. Remove the jumper cable on the negative (-) connection of the
booster vehicle's battery.
249

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents