Table of Contents
Advertisement
Driver Controls
The panoramic Vista Roof™ and power sunshade are equipped with an
automatic, one-touch, express opening feature. To stop motion at any
time during the one-touch operation, press the control a second time.
To open power sunshades and
panoramic Vista Roof™: Press
and release the
control to
open the sunshade. The front and
rear sunshades open simultaneously.
Note: Vista Roof™ will only open
after power sunshades are
completely open. Power sunshades
will only close after Vista Roof™ is completely closed.
To open the panoramic Vista Roof™ press and release the
control.
The panoramic Vista Roof™ will open to the "comfort" position. Press
and release the control again to fully open. To stop the one-touch open
feature press the control again.
Note: The "comfort" position helps to alleviate rumbling wind noise
which may happen in the vehicle with the roof fully opened.
To close the panoramic Vista Roof™ and power sunshades: Pull
the
control down and release. The glass panel will stop at the
"express close" position. Firmly pull the control again and hold to fully
close the Vista Roof™. Pull the control down and release to close the
sunshades to the "express close" position. Firmly pull the control again
and hold to fully close the front and rear sunshades.
To vent the panoramic Vista
Roof™: From the closed position,
press and release the TILT control.
To close, pull and hold the TILT
control down.
Note: If the panoramic Vista Roof™
is excessively operated, the glass
and shade motors will automatically
go into a fail-safe jog mode (manual intermittent operation) to prevent
overheating and/or damage to the motor. The motors will revert back to
normal operation after a period of idle time.
69
Hide quick links:
Advertisement
Table of Contents
