Scaling The Printing To Fit The Paper Size - Canon iP2800 series Online Manual

Scaling the Printing to Fit the Paper Size

The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be
used is as follows:
1. Check the paper size
Check that the Paper Size in the
application software.
2. Select Paper Handling from the pop-up menu
3. Set the print paper size
Check the Scale to fit paper size check box. Then from the Destination Paper Size pop-up menu,
select the paper size that is actually loaded in the printer.
4. If necessary, check the Scale down only check box
When you check this check box, the document will be reduced to fit to the paper size when the
document size is larger than the page size. The document will be printed in the original size when the
document size is smaller than the page size.
5. Complete the setup
Print Dialog is the same as the paper size that you set in the
114