Lightolier ProSpec Linear Downlight PS3M1650 Specifications

Page 1 of 2
10 1/4"
12
14 1/4"
Top View
Flanged
Ceiling Cutout: 13" L x 4 9/16" W
Ordering Information: MR 16 Series S
Cat. No. Lamp
PS3M165EBL (3) 50W MR 16
PS3M165EWL (3) 50W MR 16
PS3M165EBTL (3) 50W MR 16
PS3M165EWTL (3) 50W MR 16
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Lamp Shields: Die-formed aluminum. Shields spill light from lamp.
Removable for relamping
3. Adjustable Ring: Die-cast aluminum. 30° vertical adjustment.
4. Tortiontite Spring: For easy installation of aperture frame.
5. Housing: Die-formed NYC 20 ga. steel. Finish: Black.
6. Mounting Brackets: Adjustable vertically from outside of housing.
7. Thermal Protector: Meets NEC, CEC, UL & CSA requirements.
8. Lampholder: Steatite for GX/GY 5.3 Bi-Pin MR-16 lamps. 250° C Teflon
leads.
9. Heat Shield: Die-formed aluminum.
10. Junction Box: 14 ga. steel, 4" x 3 1/2" x 3" box. Allows inspection
from below.
11. Lamp Guard: Heat resistant Micro prismatic clear glass.
Lamp manufacture's requirement
12. Transformer Housing: Die-formed steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V. Secondary 50 VA. each lamp.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound
when used with dimmers, which may be objectionable in acoustically critical
areas. UL/cUL listed for through branch circuit wiring with maximum of
(4) no. 12 AWG, 90°C.
ProSpec
7 1/4"
10
17 5/16"
8 3/4"
Depth
8
9
7
1 3/4"
PS3M165EBL = (Flanged) Black/White
PS3M165EWL = (Flanged) White
Trimless
Add a "1" for 120v or "2" for 277v at the end of the catalog number for voltage
®
® Linear Downlight
14 9/16" L x 6 1/16" W
4" O.C.
3
1
2
30°
12" L x 3 1/2" W Opening
13" x 4 9/16" Ceiling Cutout
Ceiling Trim
Overlap
Overlap
Trimless
Trimless
Finish
All painted finishes are powder coated baked enamel.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon ® is a registered trademark of E.I. DuPont.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • B0304
PS3M1650
3 Light MR 16 Series S
4" O.C.
5
4
6
11
PS3M165EBTL = (Trimless) Black
PS3M165EWTL = (Trimless) White
Aperture Finish
Black with White Flange
White with White Flange
Black
White
Type:
www.lightolier.com