Haier AU422XIBAA Service Manual page 60

Timer ON-OFF Function
Set clock correctly before starting TIMER operation
OFF
TEMP
ON
OFF
SWING
1
MODE SLEEP
HEALTH FRESH
CLOCK SET
2
3
TIMER HIGH/SO
5
4
FILTER
LIGHT LOCK
RESET CODE
1.Unit start
After unit start, select your desired operation mode (operation
mode will be displayed on LCD)
2.TIMER mode selection
A
Press TIMER button on the remote controller to change TIMER
mode. Every time the button is pressed, display of TIMER mode
changes as follows:
ON
AM
TIMER ON
Then select TIMER ON-OFF mode.
FAN
3.Time setting for TIMER ON
Press time button
Every time the button is pressed, time increases 10 minuts.
If the button is kept pressed, time will changes quickly.
Every time the button is pressed, time decreases 10 minuts.
6
If the button is kept pressed ,time will changes quickly.
It can be adjusted within 24 hours at will.
AM refers to morning and PM refers to afternoon.
4.Timer confirming for TIMER ON
After setting correct time, press TIMER button to confirm time. Now
stops to flash, while
ON
Time displayed : unit starts at X hour X min.
5.Timer setting for TIMER OFF
Press time buttons and follow the same procedures in " Time setting
for TIMER ON"
6.Time confirming for TIMER OFF
After time setting, press SET button to confirm time.
Time displayed: unit starts at X hour X min.
7.Canel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the time setting sequence of TIMER ON and TIMER OFF,
either start-stops or stops-start can be realized.
If the time setting of TIMER ON is the same as TIMER OFF, TIMER
ON-OFF function cannot be set.
OFF
12:00 12:00
AM
PM
TIMER OFF
OFF
blank
ON OFF
12:00 12:00
PM
TIMER ON-OFF
will flash.
ON
starts flashing.
stops to flash.
OFF