Download  Print this page

Advertisement

H PLAY/CAMERA switch (16, 21)
Use this switch to toggle between playback and
recording modes.
CAMERA: Set the switch at this position to take a
picture.
PLAY: Set the switch at this position to view the images
stored in memory.
I MONITOR (PAL) switch (46)
When a video cable is connected to the VIDEO OUT
jack and VIDEO OUT of the menu is set to PAL, this
switch is enabled. Select which you use for monitoring
a picture, the LCD or video monitor.
LCD: For viewing the picture on the LCD
VIDEO OUT: For viewing the picture on the video
monitor
When VIDEO OUT is set to NTSC, you can monitor a
picture both on the LCD and a video monitor.
J Liquid-crystal display (LCD)
When the PLAY/CAMERA switch is set to CAMERA,
the scene picked up by the lens appears.
When the PLAY/CAMERA switch is set to PLAY, the
picture stored in memory appears.
When the camera is connected to a computer using the
USB cable, a picture disappears on the LCD and USB
CONNECTED appears.
K Control button (21, 34)
When the PLAY/CAMERA switch is set to PLAY, press
to select a picture.
In MENU operation, press to select a menu item and to
settle the selection.
L MENU button (17, 34)
Press to display the Menu display. Press it again to
disappear the Menu or layout display.
M Standby lamp (17)
The lamp is lit or flashing to indicate the following
conditions.
When the PLAY/CAMERA switch is set to
CAMERA
Flashing in red: Preparing for shooting, charging the
flash, storing the data (shooting is disabled).
Quickly flashing in red: No battery power remains.
Lit in red: Memory full (when AUTO ERASE is set to
OFF)
Flashing in green: Standby for shooting (manual
setting for exposure, aperture or white balance)
Lit in green: Standby for shooting (automatic settings)
When the PLAY/CAMERA switch is set to PLAY
Lit in red: Some trouble has occurred. Contact your
Sony service facility or your Sony dealer.
Flashing in green: Memory full
Quickly flashing in green: No battery power remains.
Lit in green: Normal operation
N Viewfinder
You can see the subject through the viewfinder and can
shoot a picture without using the LCD monitor.
Use the viewfinder to check the subject. The picture seen
through the viewfinder does not reflect the framing
correctly.
57
Locations of Parts

Advertisement

Chapters

Table of Contents

   Related Manuals for Sony UPX-C200

Comments to this Manuals

Symbols: 0
Latest comments: