Adjusting the Print Quality
With the MENU function of the printer, you can adjust
the picture quality. You can check the adjusted results by
printing a guide image of the camera.
Three sets of adjusted values can be stored in memory
and retrieved later.
The print quality adjustment described here is enabled
only when the camera and printer are connected using
the Bluetooth functions. If the printer is connected to a
computer, the picture quality adjustment is performed
with the printer driver. For details on installation and
operation of the printer driver, refer to "Readme
(English)" contained on the supplied CD-ROM.
Adjusting the print quality
DIGITAL PHOTO PRINTER
Turn on the printer.
Press the MENU button.
"COLOR ADJUST [>>]" appears.
Press B of the control button.
Press b or B of the control button for adjustment.
Press V of the control button.
Repeat Steps 4 and 5 to make necessary
adjustments. Adjustable content for each
adjustment item is as follows:
CYN-RED: Pressing b gives the picture more
cyan, while pressing B makes it more reddish.
MAG-GRN: Pressing b gives the picture more
magenta, while pressing B makes the picture
6 4 5
YEL-BLU: Pressing b makes the picture more
yellowish, while pressing B makes the picture
DARK: Contrast in the dark areas is adjusted.
Pressing B increases the darkness.
LIGHT: Contrast in the bright areas is adjusted.
Pressing B increases the brightness.
SHARPNESS: Pressing B makes the edges of
objects in a picture sharper.
GAMMA: Pressing b makes the color tone of the
whole picture lighter, while pressing B makes it
Press the EXEC button when the adjustment is
The display returns to the COLOR ADJUST [>>]
Printing out a guide image
To check the results of your adjustments, print out the
camera's guide images.
Press the SIZE button of the camera to select Guide
Print-RGB or Guide Print-DLGm, then execute printing.
For details, refer to the Operating Instructions
When the UPC-X46 is used
When the UPC-X34 is used