extended period of time; color changes or
deterioration of the printed image may occur.
• When you are going to store partially-used print paper,
store it in its original bag.
Attaching the tray cover
Keep the supplied tray cover attached to the paper tray
when not in use to protect print paper placed in the tray
from dust. The tray cover can be attached to either paper
tray for the UPC-X46 or for the UPC-X34.
Connecting the printer to a wall outlet
Connect the supplied AC power cord to the AC IN
connector of the printer and then to wall outlet.
AC power cord
to wall outlet
This section describes the basic procedures for taking
and printing a picture, and also displaying a picture. The
system has additional functions, which are described in
"Various Functions" on page 32 or in the Operating
Instructions (Advanced Operations) stored on the
M E N U
Turn on the printer.
Check that Ready BT RSSI [- - - -] appears on the
Set the PLAY/CAMERA switch to CAMERA.
Set the POWER switch of the camera to ON.
The camera starts searching for the printer, and
"DISCOVERING" appears on the LCD. When the
camera finds the printer, "DISCOVERED" appears,
and the printer name and Bluetooth address are
displayed in black on the LCD. If the color of the
printer name and Bluetooth address do not change
to black but remain in gray, turn the printer and
camera off and perform steps 1 through 3 again.
P LA Y
C A M E
M O N IT
E N TE
(P A L)
V ID E O
O U T