Safety; General Safety Hints - AEG CompuMaster 300 Operating Manual

2 Safety regulations
2.1 General safety instructions
Read these operating instructions carefully before initial
start-up of the CompuMaster and pay attention to the
safety instructions in any case !
Use the unit only in a perfect technical state according
to the intended purpose and subject to the operating
instructions ! Eliminate failures and any trouble which
can influence safety of personnel and goods.
The following symbols are used in these operating in-
structions to point at possible danger or for any other
reference:
CAUTION !
This symbol identifies all working and operational
procedures requiring absolute compliance to avoid any
danger to personnel.
ATTENTION !
This symbol identifies all working and operational
procedures requiring absolute compliance to prevent
danger of hurt to the personnel and any damage, irrepa-
rable or otherwise, to the CompuMaster or its comnents.
NOTE !
This symbol identifies technical requirements and
additional information requiring the operator' s attention.