Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GCO 2000 Professional Original Instructions Manual

OBJ_BUCH-1063-002.book Page 23 Tuesday, August 24, 2010 10:05 AM

Technical Data

Cut off grinder
Article number
3 601 L17 ...
Rated power input
No-load speed min
Soft starting
Weight according to
EPTA-Procedure
01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal)
see page 27.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dimensions of suitable cutting discs
Cutting disc diameter, max.
Cutting discs width, max.
Mounting hole diameter

Noise/Vibration Information

Measured sound values determined according
to EN 61029.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
Sound power level 108 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 61029:
Vibration emission value a
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 61029 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Bosch Power Tools
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
GCO 2000
different accessories or poorly maintained, the
Professional
vibration emission may differ. This may signifi-
... 20.
cantly increase the exposure level over the total
... 27. ... 26.
working period.
W 2000 1650 An estimation of the level of exposure to vibra-
tion should also take into account the times
-1
3500 3500
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
kg 18 18
the operator from the effects of vibration such
/II /II
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 61029 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
mm 355
Robert Bosch GmbH, Dept. PT/ESC,
mm 3
D-70745 Leinfelden-Echterdingen
mm 25.4
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 24.08.2010
2
=3.0 m/s , Uncer-
h
English | 23
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 U62 | (8/24/10)